PRODUCT DESCRIPTION:
UNITEC from Unipak is a complete, well-planned range of professional anaerobe glue particularly suitable for thread sealing, thread locking and retaining. Part of the glue program is also a universal cyanoacrylate glue which hardens in seconds.
APPLICATION:
UNITEC anaerobe glues are used for both pipe sealing, locking bolts and screws and securing bearings on installations carrying heating, air and potable water, but the glues may also be used for gas, oil, gasoline and other chemicals. Some of the glues are also approved for oxygen (please se the ”DIRECTIONS FOR USE”). The glues can be used directly on all installations made of iron, brass and copper. If the installation is made of stainless steel or chrome the activator AT70 has to be used prior to applying the glue.
TECHNICAL PROPERTIES:
UNITEC anaerobic glue polymerizes (hardens) between metallic surfaces at the same time as it excludes oxygen. By completely filling in the microscopic irregularities in metal surfaces the product ensures that mechanical influence is distributed uniformly throughout joints and therefore provides an optimum sealing effect not only against water and air, but also against gas, oxygen, oils, petrol and chemicals. UNIPAK's anaerobic glue also combats corrosion. UNITEC is also a cyanoacrylate glue that hardens in seconds for rapidly gluing metal, plastic, rubber, etc., together.
-
UNITEC AT70 activator for use together with Unitec Glues on passive metals such as stainless steel and chromium plated items.
-
LS28T: Low viscosity, all-round glue for sealing bearings, bushes and other cylindrical and press fit items. Medium strength. Resistant to water, oil, hydrocarbons, compressed air and chemicals.
LS30: Low viscosity, anaerobic glue for sealing bearings, bushes and other cylindrical and press fit items. Permanent strength. High resistant to vibrations.
-
GS 62: Anaerobic thread locking. Thixotropic. Can be used on oily surfaces. High resistance to vibrations. Medium strength.
GS 20: Anaerobic thread locking. For locking stud bolts, etc. Permanent strength.
GS 36: Permanent strength thread locking. Also ideal for even parts and larger thread sealing. APPROVED BY BAM (OXYGEN) and WRAS (POTABLE WATER).
-
GT18 : PTFE modified all-round thread sealer that allows easy disassembly at a later time. Seals immediately against moderate pressure. Approved by DVGW and WRAS. Low to medium strength.
GT60 : Low viscosity thread sealer for hydraulic and pneumatic applications. Maximum pipe diameter ¾". Medium strength.
GT68 : PTFE modified High viscosity thread sealer approved for use with GAS. Also ideal for use in connection with LPG and water. Yellow color code for gas. Approved by DVGW and WRAS. Medium strength
-
SA20: Universal cyanoacrylate glue (hardens in seconds). Glues the majority of materials in a few seconds.
