Tag: Drinking water approved

<<back

Drinking water

Drinking water approved

Multiseal 84L, Multiseal 84, Multiseal 84S. Liquid Sealing for domestic and drinkingwater installations. Suitable at corrosion in copper tubes. Also suitable for tubes of stainless steel, galvanized pipes and plastic tubes.Fluid loss from 10L up to 400L per 24 hours.


UNITAPE

air / compressed air / Drinking water / Drinking water approved / Teflon / Thread Seal Tape / Thread Sealing / water

UNITAPE(12 m x 12 mm x 0.075 mm). LD (density: 0.35 g/ cm3). UNITAPE thread seal tape is made of Teflon® and is ideal for systems with drinking water and air. Max. pipe diameter: 3/4”. Temperature resistant from -200°C to +100°C. Max. pressure: 20 bar. Article no. 1000100 


Glidex Paste

Drinking water approved / silicone lubricant

GLIDEX silicone paste is made from 100% pure silicone oil. It is available in a handy tube with a shoe-polish sponge for direct application. It is totally solvent-free.


Thread Sealing GT18-60-68-39

air / Anaerobic Glue / chemicals / Drinking water approved / gas approved / hydrocarbons / Oil / Thread Sealing

GT18 : PTFE modified all-round thread sealer that allows easy disassembly at a later time. Seals immediately against moderate pressure. Approved by DVGW and WRAS. Low to medium strength.

GT60 : Low viscosity thread sealer for hydraulic and pneumatic applications. Maximum pipe diameter ¾". Medium strength.

GT68 : PTFE modified High viscosity thread sealer approved for use with GAS. Also ideal for use in connection with LPG and water. Yellow color code for gas. Approved by DVGW and WRAS. Medium strength


Teflon Tape

acids/air/bases/chemicals/Cooling/Drinking water approved/gas approved/Gasolin/Heating/high temperature/Oil/Oxygen/PTFE/solvents/steam/Teflon/Thread Seal Tape/Thread Sealing/water

PRODUCT DESCRIPTION:
Thread seal tapes from Unipak are white, non-adhesive thread seal tapes produced from pure Polytetraflourethylen (PTFE) also called Teflon*.

APPLICATION:

Uniflon

acids/air/bases/chemicals/Cooling/Drinking water approved/gas approved/Gasolin/Heating/high temperature/Oil/Oxygen/PTFE/solvents/steam/Teflon/thread seal cord/Thread Sealing/water

PRODUCT DESCRIPTION:
Revolutionary, patented Pipe Thread Sealant Monofilament made of 100% Polytetrafluoroethelyne (P.T.F.E.) for sealing metal & plastic threaded pipe joints

MIDITAPE

air / compressed air / Drinking water / Drinking water approved / Teflon / Thread Seal Tape / Thread Sealing / water

MIDITAPE (12mx12mmx0,10mm).LD (density: 0.35 g/ cm3). For drinking water, heating and air. Max. pipe diameter: 3/4”. Temperature resistant from -200°C to +100°C. Max. pressure: 20 bar. Article no. 1000300


Thread Locking GS62-20-36

air / Anaerobic Glue / chemicals / Drinking water approved / gas approved / hydrocarbons / Oil / Thread Locking

GS 62: Anaerobic thread locking. Thixotropic. Can be used on oily surfaces. High resistance to  vibrations. Medium strength.

GS 20: Anaerobic thread locking. For locking stud bolts, etc. Permanent strength.

GS 36: Permanent strength thread locking. Also ideal for even parts and larger thread sealing. APPROVED BY BAM (OXYGEN) and WRAS (POTABLE WATER).


Lubricants

Drinking water approved/Lubricant/silicone lubricant/soap based lubricant/tap lubricant

UNIPAK Lubricants - for jointing plastic tubes and lubrication of rubber gaskets and o-rings. All Unipak lubricants contains high-grade silicone oil, which ensures lubricity while preserving and protecting rubber rings and o-rings from drying out and ageing - however our series SPECIAL GLIDEX is soap based and silicone-free.

 Unipak lubricants are:

 Glidex Silicone Spray

 S.A.N. 30% Silicone Spray

 Glidex Silicone Paste in 50g tube with application spunge.

 Glidex Tap lubricant

JUMBOTAPE

acids / air / bases / chemicals / Cooling / Drinking water approved / Gasolin / Heating / Oil / PTFE / solvents / steam / Teflon / Thread Seal Tape / Thread Sealing / water

JUMBOTAPE (15 m x 19 mm x 0.20 mm). MD. (density: 0.6 g/ cm3). For drinking water, heating, steam and air. Very strong and flexible - ideal for large, coarse or sharp thread (rustproof). Pipe diameter: 3/4” - 2”. Recommended temperature range from -200°C to +160°C. Article no. 1000500