PRODUCT DESCRIPTION:

GLIDEX silicone lubricant is made from 100% pure silicone oil. It is available in three versions.GLIDEX spray, a multiusable and efficient spray, GLIDEX paste, in a handy tube with a shoe-polish sponge for direct application and GLIDEX Tap Lubricant in a small practical 30g tube. They are all three solvent-free and do not contain any propellant harmful to the ozone layer.

TECHNICAL PROPERTIES:

GLIDEX silicone lubricant is extremely suitable as a slide coating for the assembly of plastic pipes, rubber strips and joints, when drawing cables in tubes and for the moisture insulation of electrical installations. Prevents ageing of rubber parts. Furthermore, GLIDEX spray is an efficient, quick-acting slide coating for sluggish locks, hinges, fittings, tools etc. Spray a layer on your saw-blade and it acts like a new one!. A little paste on the tip of the screw and it works swimmingly!. GLIDEX tap lubricant is dedicated for the lubrication of O-gaskets in drinking water taps. GLIDEX tap lubricant is very suitable for use together with EPDM- and EBR rubber. Temperature working range –40 to +200 ºC. DVGW-approved for drinking water.

DIRECTIONS:

Generally: Fittings and pipes should be cleaned for sand, earth and dirt.
GLIDEX spray: Shake the aerosol spray slightly. Hold the spray upright and the nozzle 10 - 20 cm from the subject. Spray an even layer of GLIDEX spray on the parts after which assembling can be carried out straight away. Is the GLIDEX spray to be used as a lubricant for hinges and the like the nozzle should be hold close to the part. Squeeze the nozzle carefully and let it work for a while (perhaps exercise the materials a little thus the silicone oil can penetrate).
GLIDEX pasta: Squeeze out a "line" of silicone paste of 1 - 2 cm on the sponge and divide the silicone paste evenly on the materials which are to be assembled. Assembling can be carried out.
GLIDEX tap lubricant: Squeeze out a "dot" of tap lubricant and divide the lubricant evenly on the materials which are to be assembled. Assembling can be carried out.

All three types of GLIDEX silicone sliding agents do not dry up, and therefore later adjustment can easily be carried out

CAUTION! Make sure the GLIDEX silicone sliding agent does not get on floors and shue-soles as it will cause great risk of fall accidents. Do not ever use silicone oils in connection with painting.

The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user´s responsibility to determine suitability for the user´s purpose of any productionmethods mentioned herein.

APPROVAL/TEST:

The plumbing trade regulations recommend non-solvent, silicone spray as a sliding agent.

PRODUCT DESCRIPTION:

SUPER GLIDEX is a snow-white, odourless and silicone-based lubricant which facilitates assembly of O-ring sealed pipes etc.. SUPER GLIDEX has a pleasant creamy consistency. Neutral pH-value (about 7). Frost-proof. Replaces traditional soap-based gliding agent / lubricant.

TECHNICAL PROPERTIES:

SUPER GLIDEX facilitates installations, prevents misfitting and damaging of the rubber joint. The silicone content facilitates future adjustment or disconnection. SUPER GLIDEX prevents ageing of rubber components. SUPER GLIDEX has very good adherence properties even in wet/moist conditions and it is pleasant to work with as well as economic in use.

DIRECTIONS:

Pipes and fittings should be cleaned for sand, earth and dirt. Apply the spigot end of the pipe an even layer of SUPER GLIDEX, after which assembling can be carried out easily. SUPER GLIDEX is applied with a brush or directly on the pipe from the tube. Besides, follow assembly instructions of the pipe manufacturer.

The data contained herin are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user´s responsibility to determine suitability for the user´s purpose of any productionmethods mentioned herein.

CLEANING:

Clean with water. Stain in eyes should be washed away with water. NOTICE: Clean floors carefully for any spill to avoid fall accidents. Spill on the clothes is easily removed at machine-washing.

TEST:

Neither VA-approval nor other specification approvals are required for sliding agents. SUPER GLIDEX is not injurious to health when used as prescribed.

PRODUCT DESCRIPTION:

S.A.N.® silicone lubricant is made of 100% pure, high-grade silicone-oil. S.A.N.® silicone lubricant has a full 30% concentration of silicone-oil, which makes it very efficient and economical in use. It is fitted with an "up-side-down" valve enableing it to be used in any angle. S.A.N.® silicone lubricant is solvent-free and and does not contain propellants harmful to the environment or the ozon-layer.

TECHNICAL PROPERTIES:

S.A.N.® silicone lubricant is extremely suitable as a slide coating for the assembly of plastic pipes, rubber strips and joints, Drawing of cables in tubes and for the moisture insulation of electrical installations. Prevents ageing of rubber parts. Furthermore, S.A.N.® silicone lubricant is an efficient, quick-acting slide coating for sluggish locks, hinges, fittings, tools etc. Spray a layer on your saw-blade and it acts like a new one!.

DIRECTIONS:

Fittings and pipes should be cleaned for sand, earth and dirt. Shake the aerosol spray slightly. Hold the the nozzle 10 - 20 cm from the subject. Spray an even layer of S.A.N.® spray on the parts after which assembling can be carried out straight away. Is the S.A.N.® spray to be used as a lubricant for hinges and the like the nozzle should be hold close to the part. Carefully press the valve and let the silicone-oil work for a while (exercise the materials a little thus the silicone oil can penetrate if necessary). S.A.N.® silicone lubricant does not dry up, and therefore later adjustment can easily be carried out.

CAUTION! Make sure the S.A.N.® silicone lubricant does not get on floors and shue-soles as it will cause great risk of fall accidents. Do not ever use silicone oils in connection with painting.

The data contained herin are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user´s responsibility to determine suitability for the user´s purpose of any productionmethods mentioned herein.